Cutting Board Feet vs No Feet: Grip, Hygiene, and Airflow
Not sure if you should add rubber feet to your cutting board? Here’s the practical comparison—grip, hygiene, and airflow—plus quick install tips and when I skip feet.
Read MoreCutting Board Feet vs No Feet: Grip, Hygiene, and Airflow
How to Flatten a Cutting Board: Planer vs Router Flattening Jig
Trying to flatten a cutting board after glue-up? Here’s when a planer is the fastest option — and when a router flattening jig is the safer choice for wide or twisted boards — with simple steps for both methods.
Simple Walnut Cutting Board (Face Grain) – Beginner-Friendly Build
Want a cutting board project that’s actually beginner-friendly? This simple walnut face grain cutting board is a clean start-to-finish build: cut, glue, sand, and finish with a food-safe oil — no epoxy, no fancy extras.
DIY Table Saw Push Block: How to Build a Safe Push Block for Clean Cuts
Build a DIY table saw push block that keeps your hands safe and your cuts clean. In this guide, I’ll show you step by step how to make a comfortable, grippy push block for ripping narrow pieces on the table saw.
How to Build a Picture Frame Jig for the Table Saw (Perfect 45° Corners)
Learn how to build a DIY picture frame jig for your table saw so you can cut consistent 45° miters for picture frames and small projects. In this guide, I’ll walk you through the build, setup, and use of a table saw picture frame jig (miter sled) for clean, repeatable cuts.
How to Build a Table Saw Thin Strip Jig (Safe, Repeatable Thin Rips)
This guide shows you how to build a table saw thin strip jig that makes cutting thin strips safe, simple, and repeatable. I’ll walk you through the design, the build, and how to set it up for accurate, consistent thin rips on your table saw.
How to Cut a Perfect Juice Groove in a Cutting Board (Step-by-Step Guide)
Learn how to cut a perfect juice groove in a cutting board using a router, a simple jig, and a few careful passes. This step-by-step guide covers ideal groove depth and offset, router bit selection, setup tips, and how to avoid burn marks so your boards look clean and professional.
DIY End Grain Cutting Board: Complete Step-by-Step Build Guide
Learn how to make a DIY end grain cutting board step by step. This advanced woodworking project will teach you how to cut, glue, flatten, and finish a durable board that looks incredible and lasts for years.