What is a jigsaw guide used for?

A jigsaw guide helps you make accurate straight cuts and 90° crosscuts with a jigsaw, improving precision and repeatability in your woodworking projects.

Can I make a jigsaw guide with only a jigsaw?

Yes, you can make a jigsaw guide using just a jigsaw and some basic materials like plywood and aluminum L-angles. It’s a beginner-friendly project that doesn’t require advanced tools.

How do I make sure my cuts are straight with a jigsaw?

To ensure straight cuts with a jigsaw, use a guide rail, go slowly, avoid pressing too hard against the guide, and use a jigsaw blade designed for clean, straight cuts.

What materials do I need to build a jigsaw crosscut jig?

You’ll need birch plywood for the base, aluminum L-angles, M4 bolts and washers, a handle or wood block, and double-sided tape. Optional items include glue, sandpaper, and screws.

Can this jig be used with any jigsaw?

Yes, the jig can be adapted to fit most jigsaws. You’ll need to adjust the guide rail spacing based on the width of your jigsaw’s base and blade position.

jigsaw projects – AllFlavor Workshop

How to make a DIY Jigsaw Table (Step by Step Guide)

About the author, Lukas — Wed, 13 Jul 2022 10:41:47 +0000

AllFlavor Workshop

How to make a DIY Jigsaw Table (Step by Step Guide)

If you have a jigsaw at home, you can easily turn it into a jigsaw table. A jigsaw table is primarily used when you need to make neat and precise cuts. The build and use are very similar to a scroll saw or a band saw, but it is important to note that an “inverted jigsaw table” behaves differently. And that is also how the tool needs to be approached.

Using the jigsaw upside down offers options that are not available through classic use. You will be able to cut much smaller pieces, make straight cuts, make more delicate and finer cuts, or cut circles and curved shapes that otherwise would have been too difficult.

Nevertheless, to get the best result you need to use the right type of blade for the job. Not every blade is suitable for every cut. This is very important not only from the point of view of work quality but also from the point of view of work safety.

Having the jigsaw inverted leaves the blade exposed and extra caution is needed during work. When making a jigsaw table I advise adding additional safety features. The main ones include: the build must be solid, the attachment of the jigsaw to the table firm, and the blade should run in blade guides.

The jigsaw table I’m crafting can be securely clamped to a benchtop, enhancing stability and minimizing vibrations. The bigger size of the table allows for the accommodating of larger pieces of wood. The arm with the blade guides can be mounted both from the back and from the side, which also makes it easier to cut long pieces of wood. Plus, its portability is a bonus.

Mounting and attaching a jigsaw to a table can easily turn your jigsaw into a precision jigsaw table.

RELATED:

Can You Cut Metal with a Jigsaw?

How to Mount a Jigsaw to a Table Video

If you want to see how to build a jigsaw table saw, watch the video below for a step-by-step guide.

I appreciate every YouTube subscriber. It’s free and easy to subscribe to — just Click Here To Subscribe. Thank you!

Jigsaw Table Video
Jigsaw Table Plans
The Material you will need
General Questions
1. Is a jigsaw the same as a scroll saw?
2. How to change a blade on a jigsaw table?
3. How much blade is needed above the table when using a jigsaw?
4. Safety precautions while working on a jigsaw table
How to make a jigsaw table step by step
1. Step 1: Build the table desk
2. Step 2: Attach the table legs
3. Step 3: Make the arm attachment
  1. Jigsaw Table Arm – Rear Attachment
  2. Jigsaw Table Arm – Side Attachment
4. Step 4: Make a simple jigsaw table fence
How to set and use a jigsaw table
Woodworking Jigs Used

*Safety is your responsibility. Make sure you know what you’re doing and take all necessary safety precautions while working with power tools. Safety comes first! You might want to check these safety tips before jumping on making the jigsaw table.

Jigsaw Table Plans PDF

Jigsaw Table Plans here

Download plans here

Material needed for a DIY Jigsaw Table

Jigsaw Table Saw:
Plywood – 400 x 500 x 21 mm (15,7 x 19,7 0,8”)
Spruce Wood (4x) – 240 x 40 x 40 mm (9,44 x 1,57 x 1,57”)
Plywood (2x) – 400 x 130 x 12 mm (15,7 x 5,1 x 0,47”)
Plywood – 460 x 120 x 12 mm (18,1 x 4,72 x 1,47”)
Plywood – 120 x 130 x 9 mm (4,72 x 5,11 x 0,35”)

Jigsaw Table – Arm attachment, Adjustable Arms, Bearing Guides:
Plywood (2x) – 100 x 110 x 12 mm (3,93 x 4,33 x 0,47”) – https://amzn.to/3tLZ5ez
Plywood (1x) – 100 x 110 x 9 mm (3,93 x 4,33 x 0,35”) – https://amzn.to/47pmMXQ
Aluminum L angle (2x) – 100 x 15 x 15 mm (3,93 x 0,59 x 0,59”)
Plywood (2x) – 380 x 50 x 12 mm (14,96 x 1,96 x 1,47”)
Plywood (2x) – 190 x 50 x 12 mm (7,48 x 1,96 x 0,47”)
Plywood – 110 x 50 x 12 mm (4,33 x 1,96 x 0,47”)
Plywood (2x) – 80 x 50 x 12 mm (3,14 x 1,96 x 0,47”)
Plywood – 60 x 60 x 12 mm + 60 x 30 x 12 mm (2,36 x 2,36 (1,18)x 0,47”)

Jigsaw Table – Cutting Fence:
Aluminum L angle – 540 mm (15 mm x 15 mm x 2mm)
Plywood – 12 mm thickness

Tools:
Jigsaw – https://amzn.to/3S85cDr
Trim Router – https://amzn.to/3HbQcOg
Hand Drill – https://amzn.to/3HqLEnH
Circular Saw – https://amzn.to/4aMD0xg
F-Clamps – https://amzn.to/48ArzY1
Spring Clamps – https://amzn.to/41Nuh9D
Chisel Set – https://amzn.to/3tHNJrT
Machinist Square / Speed Square

Other:
Drill bits – 6mm – https://amzn.to/48Kaaf7
Forstner bits – 15mm – https://amzn.to/3Hd1aDb
Jigsaw Blades – https://amzn.to/4aXeF83
Wood Glue – https://amzn.to/48ltKhJ
Epoxy – https://amzn.to/3tJ5R4L
Double-Sided Woodworking Tape – https://amzn.to/3tPMGpM
Wood Screws (longer, shorter)
M4 Bolts, M6 Bolts, M6 T-nuts, M6 Washers
Bearings for M6 bolts – https://amzn.to/48QpYwD
Hardware Assortment Kit – https://amzn.to/41PodgQ
DIY Star Knob Jig

Check all the Tools I Use

We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.

PIN THIS TO PINTEREST

What are the benefits of an inverted jigsaw table?

An inverted jigsaw table, where the jigsaw is mounted upside-down, offers a unique approach to woodworking. It combines the flexibility of a handheld jigsaw with the stability of a stationary tool.

Increased Stability: With the jigsaw fixed to the table, there’s a reduction in vibrations, resulting in cleaner and smoother cuts.
Enhanced Precision: The fixed position of the jigsaw ensures a consistent cutting angle, leading to more accurate cuts, especially on intricate designs.
Safety: Keeping both hands free means you can focus on guiding the wood safely, reducing the risk of accidents.
Versatility: The inverted setup allows the user to approach the wood from multiple angles, making it easier to handle complex projects.
Cost-Efficient: For hobbyists or those on a budget, an inverted jigsaw table offers the functions of a table saw without the hefty price tag.

How much blade above table when using a jigsaw?

The blade height above the table must be sufficient to fully cover the thickness of the cut material. More precisely, at the lowest point of the cut (the moment the jigsaw blade is inside the jigsaw), the jigsaw blade must be higher than the thickness of the material being cut.

This is important for 2 main reasons:

Precision of cut – if the height of the material is higher than the blade it will not be possible to cut through the material cleanly.
Safety – a short blade will be pushing the material away from the table, making it impossible to hold the material firmly, and may result in injury.

How to change a blade on a jigsaw table?

Changing a blade on a jigsaw table happens quite frequently and having good access to the release lever is one of the essential prerequisites to quickly, easily, and securely change the blade.

Changing a blade on a jigsaw differs among models. Some allow for hands-only blade replacement, while others require specific tools, depending on the particular model. When transforming a jigsaw into a jigsaw table, it’s more convenient to use a jigsaw that features a tool-less system.

Changing a blade on a jigsaw table:

Make sure the jigsaw table is turned off and unplugged
Make sure you have easy access to the blade release lever
Disengage the blade release lever and remove the blade
Insert the new blade and make sure it is well positioned in the blade (roller) guide
Secure the blade in position

Let's Build It

The jigsaw table desk is made of 12 mm and 9 mm plywood and the table legs of spruce wood prisms. All the material I used for the build is easily available at any local hardware store.

The table can be used separately or it can be clamped down to a workbench. That is actually the setup I prefer. Simple clamps will do the job. The table is much more stable, and there is almost no vibration at all.

The larger surface of the table (400 x 500 mm) can accommodate longer pieces of wood, making work more convenient.

The jigsaw table also contains an adjustable arm, that holds the blade in position while cutting. The blade oscillates between two adjustable bearings, which can hold different types of blades.

There are two setups for the adjustable arm:

Rear attachment – the extension is mounted on the back of the table and allows the arm to move forward and backward. The height of the arm is fixed. Such a setting is suitable for cross-cuts.
Side attachment – the extension is mounted from the side of the table and allows the arm to move from side to side. The height of the arm is adjustable. This setting allows cutting longer pieces of wood.

DIY Jigsaw Table saw parameters:

Table dimensions: 400 x 500 mm
Table height: 270 mm
Adjustable Arm:
1. Rear attachment: workpieces up to a height of 30 mm
2. Side attachment: workpieces up to a height of 70 mm
Portable, can be easily clamped to a workbench

I have used multiple tools to build the jigsaw table, but not all of them are necessary. They make the work easier and more precise. A jigsaw should be enough. Though having and using some of the woodworking jigs would be definitely useful.

How to Make a Jigsaw Table (Step-by-Step)

Step 1: Build the jigsaw table desk

For the table desk, you will need a 12 mm and 9 mm thick plywood board (in total 400 x 500 x 21 mm). Start with the 9 mm thick board.

Place the jigsaw on the board and outline the outer shape of the jigsaw base (without the jigsaw shoe).

NOTE: Take into account the length of the jigsaw and whether your model is corded or cordless.

Cut out the drawn area. I am using a router jig for precise cuts but using a jigsaw together with sandpapers or a chisel would work as well. The goal is to cut out a rectangle in which the jigsaw base will fit.

Glue the two boards together (9 + 12 mm) and additionally fix them with screws to avoid any wobbling.

Unscrew the jigsaw’s base plate, tape a double-sided tape on it, and insert it in the cut area. Then mark the holes for the screws on the board and remove the base plate again.

Drill all 4 holes for the screws (I am using a 4mm drill bit) and a larger hole (15mm) for the jigsaw blade. Insert the jigsaw in and attach it with screws. Make sure the screws are flush with the table.

NOTE: The hole for the jigsaw blade should be wide enough so the blade is free and does not touch the outer edge of the hole in any way. Also, you should be able to freely insert blades of varying sizes without restrictions.

Step 2: Attach the table legs

Cut 4 table legs, each measuring 240 mm in length. You will get the best results by using a table saw crosscut sled. If you don’t have a table saw, use a jigsaw crosscut jig or a circular saw guide to achieve precise and clean right-angle cuts.

Attach the legs to the stands(400 x 130 x 12 mm) with glue and screws. The position of the legs is 2 cm from the edges of the base stands.

Mark the position of the legs on the jigsaw table. I cut a precise square slot (5 mm deep) in the table, added glue, and pushed the legs in. Additionally, I secured the legs with screws from the other side of the table, making sure the screws are flush with the table.

NOTE: You can also use an adjustable router template guide to cut squares that precisely copy the shape of the leg. If you don’t have a router or don’t want to sink the leg in, you can always attach the leg directly to the table.

Find This Blog Post Useful?

Join my newsletter to receive the latest news, tutorials, and project plans sent directly to your inbox!

Step 3: Make the arm attachment

Cut the following plywood pieces to size (100 x 110 mm) and glue them together. They don’t need to be necessarily square. (I am using 3 pieces, two of them 12 mm thick, one 9 mm thick – this thickness is sufficient for the blade).

Add aluminum guide rails on top (100 x 15 x 15 mm), leaving a 50 mm distance between them. They serve as guiding rails for the adjustable arm. Place the rails on the attachment and fix them with screws.

TIP: I am using double-sided tape to first attach the rails on the stand and then fix them with screws.

Drill 4 ø6mm holes in the corners of the stand and cut a hexagon for the screw head.

Drill 2 ø6mm holes on the center line (between the aluminum guide rails) and insert a t-nut on the opposite side of the attachment. Make sure they are flush with the surface.

1. Jigsaw Table Arm – Rear Attachment

Place the arm attachment on the center line of the back of the table and make sure the center line of the aluminum rails points towards the jigsaw blade. Fix the attachment with clamps and drill 4 holes through the jigsaw table. Then fix the attachment to the table with screws and nuts.

To make the sliding adjustable arm cut 2 plywood pieces (380 x 50 x 12 mm), glue them together, and cut a slot on the center line of the piece. I used a router dado jig to cut the slot but you can use a jigsaw as well (drill a hole on each side of the slot and then cut the slot with a jigsaw).

Sand the outer sides of the arm and make sure it fits and slides nicely in the guide rails. Fix the arm to the attachment with wooden knobs. You can make those with a simple wooden knob jig.

Build bearing guides for the blade

Cut a plywood piece (50 x 30 x 12 mm) and drill in 2 ø6mm holes 2 cm apart. Insert t-nuts and make them flush with the surface.

Then attach the bearings with bolts and washers and adjust them as necessary to easily fit the jigsaw blade between them.

TIP: I am using bearings with an inner diameter of 8mm. Thus, the 6mm bolts have space for fine adjustments.

2. Jigsaw Table Arm - Side attachment

To mount the adjustable arm from the side of the jigsaw table you need to add a plywood desk on one of the sides of the table to which the arm attachment can be mounted. I am reusing the already-created attachment from the previous build.

Cut 2 plywood pieces (460 x 120 x 12 mm; 120 x 130 x 9) and fix the pieces together with glue and screws. Then attach the board to the side of the jigsaw table. It is important that the board is firmly attached to the table in order to prevent any vibration and wobbling.

Fix the attachment to the board in the same way as in the case of the rear attachment.

Make a wooden support for the adjustable arm. The support will be fixed to the side attachment and the adjustable arm will be fixed on top of the wooden support.

Glue 2 plywood pieces together (190 x 50 x 12 mm) and cut a slot along the centerline. Attach it to a plywood piece with 2 inserted t-nuts (110 x 50 x 12 mm). Use corner supports and screws to increase the strength of the connection.

Attach the support on the table and set the desired height. Mount the arm on the support and adjust it so that the bearings surround the blade.

Step 4: Make a simple jigsaw table fence

I made a table fence using an aluminum L-angle and plywood. It has a simple locking mechanism at one of the ends. Nevertheless, you could as easily clamp a straight edge guide on the table and use it as a fence.

And this is what the finished jigsaw table looks like.

Conclusion

If you want to build a similar alternative to a scroll saw then a simple DIY jigsaw table can do the job. There are a few setups of the adjustable arm that will allow you to cut both short and long workpieces. Together with the right type of blade, you’ll be able to make different types of cuts and cut through different types of materials, such as wood, plastic, and even ceramic or metal.

How to set up and use a jigsaw table

The following steps describe how to set up and use a jigsaw table. Keep in mind to use the right jigsaw blade for the job. Different types of materials and different types of cuts require a matching blade. Using the right blade is one of the most important things when using a jigsaw, both in terms of quality and safety.

When using a jigsaw upside down for every upstroke the jigsaw is pushing the workpiece away from the table. For that reason, it is better to use a standard jigsaw blade since the jigsaw will naturally be pulling the blade against the table. A reverse tooth blade for fine cuts can be used as well but keep in mind how the blade behaves.

Cutting With a Jigsaw Table (using jigsaw upside down)

Place the jigsaw table on the workbench and secure it with clamps
Make sure nothing is wobbling and everything is fixed
Insert the blade in the jigsaw and make sure it is well positioned in the jigsaw roller guide
Secure the blade in position
Mount the adjustable arm on the back or the side of the jigsaw table depending on the size of the stock and the cut
Adjust the height of the arm so the jigsaw blade is well positioned between the guiding bearings and stays between the bearings even in its lowest position
Turn on the jigsaw table
Slowly make the cut and let the jigsaw do the work

Cut slowly and steadily to get the best result, there is no need to rush. Let the jigsaw do the work and follow its rhythm.

Is jigsaw the same as scroll saw?

There are many similarities between a jigsaw and a scroll saw, and these two types of saws are often confused. They work on a similar principle, nevertheless, they are two different tools whose uses are also different.

A jigsaw is a handheld portable power tool that is often used for all sorts of different curved and intricate cuts. And although a jigsaw can be also used for straight cuts, its advantage is mainly found in cutting irregular shapes. A Jigsaw is equipped with quite a narrow blade, that can cut through a wide range of materials. When operating a jigsaw the reciprocating blade is pushed into the workpiece.
A scroll saw is a fixed stationary power tool. The blade is usually smaller and narrower than in the case of a jigsaw and is gripped by the machine from both ends. Such a thin blade allows for more delicate and intricate designs without breaking or binding. The kerf is very narrow and cutting interlocking pieces like a puzzle is very easy. When using a scroll saw the workpiece is pushed into the blade.

A jigsaw table is very close to a scroll saw, nevertheless, a jigsaw is more powerful and uses different types of blades.

Safety precautions while working on a jigsaw table

Generally, a jigsaw is safer in comparison to other saws. Nevertheless, using a jigsaw as a standalone tool or in a table setup requires following all the necessary safety precautions such as wearing safety glasses or goggles (full-face mask), hearing protection, or wearing adequate clothes.

Apart from standard safety precautions, there are a few areas to watch out for specifically when using a jigsaw table.

The hole for the blade in the table should be large enough to keep the blade free and not be squeezed by the table. If the blade does not move freely, there is a higher risk of blade breakage
The jigsaw needs to be firmly attached to the table
The entire build needs to be solid and firm. Mounting the jigsaw table on a bench top gives the jigsaw table better stability and reduces vibrations
The jigsaw blade should be running between blade guide bearings all the time, even in the lowest position of the blade
An easily accessible switch should be in place in case of need in order to quickly turn off the jigsaw
Use the right jigsaw blade for the job. A jigsaw blade that cuts on the upstroke is a better option

📌 Found this post useful and inspiring?
Ready to build it? Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

I hope the information was helpful and you can start with your jigsaw table endeavors. 😉

How to Make a Jigsaw Table DIY

Woodworking jigs used for this project:

This post How to make a DIY Jigsaw Table (Step by Step Guide) first appeared on AllFlavor Workshop and is written by About the author, Lukas

5 DIY Jigsaw Guides For Your Workshop (Best For Beginners)

About the author, Lukas — Fri, 24 Jun 2022 18:45:49 +0000

AllFlavor Workshop

5 DIY Jigsaw Guides For Your Workshop (Best For Beginners)

There 2 main types of jigsaw guides – jigsaw guides for straight cuts (and crosscuts) and jigsaw circle cutting guides.

A jigsaw is one of the most versatile tools in the workshop and probably one of the first tools to get for a workshop. There are plenty of cuts you can make with a jigsaw, ranging from straight cuts, crosscuts, circular cuts, and bevel cuts to plunge cuts.

The type of blade used determines for what purpose and what type of cut the jigsaw should be used. Using the right blade is one of the most important things when cutting with a jigsaw. Different types of materials require different blades. Using the right blade will not only make cutting easier but also the resulting cut will be cleaner and more accurate. This is especially the case when cutting a circle with a jigsaw.

Making clean curved cuts with a jigsaw is quite easy. That is actually one of the main advantages of a jigsaw. But what if you needed to make a precise long straight cut? Making accurate straight or circular cuts with a jigsaw might not be entirely straightforward, especially, if you are operating a jigsaw freehand. In such a situation, it is better to use a guide that will make the cuts cleaner and more accurate.

Read below how to build these 5 different types of DIY jigsaw guides, what material you will need, and how to use them. I have built them all and have tried them all.

Read through the article to find out what are their benefits, how much money and time it takes to build them, the top picks for straight cuts versus circular cuts, and the best fit for your needs.

RELATED:

AllFlavor Workshop Youtube Channel

I appreciate every YouTube subscriber. It’s free and easy to subscribe to — just Click Here To Subscribe. Thank you!

Jigsaw Guide Basics
DIY Jigsaw Guides for Straight Cuts and Crosscuts
1. Simple Jigsaw Guide for Short Cuts
2. DIY Jigsaw Guide Rail
3. DIY Jigsaw Guide and Crosscut Jig
4. Adjustable Jigsaw Guide for Straight Cuts and Crosscuts
DIY Jigsaw Guides for Circles
1. DIY Jigsaw Circle Jig and Rip Fence Guide
Jigsaw Guides Evaluation

*Safety is your responsibility. Make sure you know what you’re doing and take all necessary safety precautions while working with power tools. Safety comes first!

Always be cautious and careful when using any power tool.

PIN THIS TO PINTEREST

Jigsaw Guide Basics

In most cases, cutting with a jigsaw is done freehand. It is not that common to use a guide with a jigsaw since they are very often used to make irregular cuts, curved cuts, inner cuts, and all sorts of different intricate cuts. But what if you need to make an accurate straight cut or a perfectly circular cut? If you have experience with woodworking, you might even be able to do so without using a guide, otherwise, it is very useful to have one at hand.

There are many shop-made guides available on the market that could be used, but the question is whether you need to buy one. I am sure they would do the job, but these guides are usually quite expensive. With a little effort, you can make a similar guide yourself and save some money for other workshop equipment.

Best DIY Jigsaw Guides

Type of Jigsaw Guide	Time to Build	Difficulty	Cost of Build	Best For
Simple Jigsaw Guide	1 Hour	Beginner	Few Dollars	Short cuts
Jigsaw Guide Rail	1-2 Hours	Beginner	Few Dollars	Short Straight Cuts
Jigsaw Guide and Crossct Jig	2-3 Hours	Beginner, Advance	Few Tens of Dollars	Short Straight Cuts, Crosscuts
Adjustable Jigsaw Guide	4-6 Hours	Advance	Tens of Dollars	Straight Cuts, Prcise 90 Degree Crosscuts
Jigsaw Circle Jig	3 Hours	Beginner, Advance	Few Tens of Dollars	Circular Cuts, Rip Cuts

Below I have included a summary of how to make these several different types of jigsaw guides. They are ranked from the simplest to the most difficult in terms of production complexity. In all cases, the only power tool you will need is a jigsaw, which you probably already have (although you can make your life easier using other tools as well).

For more details on each type of jigsaw guide, be sure to check out the relevant article.

Make Clean Cuts with a Jigsaw

As mentioned above, one of the most important things when cutting with a jigsaw is using the right jigsaw blade. The use of inappropriate and incorrect blades often leads to unclean and skewed cuts. A jigsaw guide will help you make straight and accurate cuts but a jigsaw blade will ensure the cut is clean and not bent. It is the combination of these two factors that ensure a precise cut.

If you want to prevent your jigsaw blade from making skewed cuts take a look at these tips to stop your jigsaw blade from bending.

Types of Jigsaw Guides

DIY Jigsaw Guides for Straight Cuts and Crosscuts

1. Simple Jigsaw Guide for Short Cuts

This is a very simple and an easy to make jigsaw guide. You can make one yourself in no time, at no cost using only the material you already have in the workshop. The guide is great for short straight cuts and crosscuts.

Material and tools needed	Time to build	Cost of build	Difficulty
Spruce wood (planed) M5 Bolt, M5 Washer, M5 Wing Nut Wood screws, Wood Glue	1 hour	Few dollars	Beginner

Woodworking jigs used to make this jigsaw guide (not a necessity though):

Jigsaw Guide and Crosscut Jig

Conclusion: An easy jigsaw guide anyone can build no matter the skill level. It is easy to use, and easy to set up, although from experience it is quite difficult to handle, quite cumbersome to use, and it can be used to only make very short cuts.

2. DIY Jigsaw Guide Rail

If you are building a workshop on a budget or you just want to make an addon for your jigsaw you should consider making this jigsaw guide track. You will be able to build one quickly, almost at no cost. The guide is great for long straight cuts and could be used for crosscuts as well.

The jigsaw moves in the track and gets support from both sides which makes it much easier to keep the jigsaw straight during the cut. The guide rails are made of wood, but aluminum guide rails could be used as well.

Material and tools needed	Time to build	Cost of build	Difficulty
Birch Plywood - 4x Planed Spruce Wood Stripes - 2 for rails; 2 for stoppers Wood Glue, Wood Screws, Sandpaper	1-2 hours	Few dollars	Beginner

Woodworking jigs used to make this jigsaw guide (not a necessity though):

Ruler Marking Gauge

CONCLUSION: I love this guide – this is definitely one of the best and easiest jigsaw guides you can build. I have been using this guide for a lot of projects, especially because of its usability.

The setup and use are very easy:

Place the guide track over the line where you want to make the cut
Adjust as needed using the sight holes
Clamp it down to the workpiece
Make the cut

3. DIY Jigsaw Guide and Crosscut Jig

This jigsaw guide can be used for both straight cuts and crosscuts. The build is solid, the straight edge guide and the crosscut fence are made of aluminum and the guide can be easily set up and used right away. The crosscut fence on the bottom of the guide makes sure you will be able to cut at 90 degrees, though precision is required when building the guide.

Material and tools needed	Time to build	Cost of build	Difficulty
Birch Plywood 2x Aluminum L Angle M4 Bolts, M4 Nuts, M4 Washers Double-Sided Tape, Handle, Sandpaper	2-3 hours	Tens of dollars	Beginner

Woodworking jigs used to make this jigsaw guide (not a necessity though):
- Ruler Marking Gauge
- Portable Clamp Vise

CONCLUSION: This is a great guide for short cuts and crosscuts and that is how I have been using it. Making quick short cuts and crosscuts is really easy. You simply place the guide on the workpiece and make the cut.

The guide is not meant to be used for longer straight cuts. The jigsaw is supported only from one side which can cause the jigsaw to tilt resulting in a skewed cut.

4. Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

The adjustable jigsaw guide is an all-in-one solution that can be used to make both longer straight cuts and crosscuts. This is the most advanced jigsaw guide combining several different guides into one – the jigsaw guide track and the jigsaw crosscut jig.

One of the main advantages is the adjustable crosscut fence which makes sure the cuts are always at 90 degrees.

The larger size of the guide allows for accommodating longer pieces of wood. The guide can be used freely or clamped down to a workbench for better stability and accuracy.

Material and tools needed	Time to build	Cost of build	Difficulty
Plywood Aluminum Rails Forstner bit, Handle, Epoxy resin M6 Bolts, M6 Wing Nut, Wood screws	4-6 hours	Tens of dollars	Advance

Woodworking jigs used to make this jigsaw guide (not a necessity though):

CONCLUSION: A great guide for both straight cuts and cross cuts. The adjustable crosscut fence makes it easy to fine-adjust the guide and cut at 90 degrees. The larger size of the guide allows for cutting bigger pieces of wood.

On the other hand, the higher price of the material, the longer time spent on the build, and the difficulty of building the guide does not aim at woodworking beginners. Great results can be also achieved with the previously discussed guides.

DIY Jigsaw Circle Jigs

1. DIY Jigsaw Circle Jig and Rip Fence Guide

The jigsaw circle jig allows both circular cuts and straight cuts using the jigsaw fence. It is easy to mount on a jigsaw and can be mounted on both the left and right sides. The arm is extendable and allows cutting circles of up to 40 mm in diameter. A great jig to keep with your jigsaw, that can be quickly used outside or at remote locations.

To cut a perfect circle in wood it is essential to use the right jigsaw blade.

Material and tools needed	Time to build	Cost of build	Difficulty
Plywood Brass flat bar, Brass rod Drill bit (for metal), Epoxy resin Hold down knob / bolt Hand Drill	3 hours	Few dollars	Beginner

Woodworking jigs used to make this jigsaw guide (not a necessity though):

Ruler Marking Gauge

CONCLUSION: An easy-to-build jigsaw guide that can be quickly set up and used. A great jig to keep with your jigsaw that can be used anytime needed.

Cutting a perfect circle with a jigsaw is not an easy task, and there are better tools for the job, like a trimming router. But it is achievable. The most common problem is a skewed cut but it can be avoided with the right technique and jigsaw blade.

Which jigsaw guide should I build first?

All these DIY jigsaw guides are very useful for woodworking beginners and for someone who is building a new workshop from scratch. There is no need to spend the extra money on buying jigsaw guides. You can easily build these workshop jigs yourself and use the extra money elsewhere.

1. Best DIY Jigsaw Guide for Straight cuts

When it comes to making long straight cuts with a jigsaw a DIY jigsaw guide rail would be my #1 choice. It is extremely easy to set up the guide, adjust it as necessary and make the cut. The jigsaw base is supported from both sides and the jigsaw itself slides between two guide rails which makes it much easier to keep the jigsaw straight during the cut. The guide can be also used for crosscutting, even though it doesn’t have a 90-degree crosscut fence.

The length of the guide is 75 cm long which is sufficient for the majority of cuts.

The price of the required material is really low which together with the jigsaw’s usability makes it one of the best DIY jigsaw guides.

2. Best DIY Jigsaw Guide for Crosscuts

In my experience, the DIY Jigsaw Guide and Crosscut Jig is the best choice for making crosscuts with a jigsaw. The guide is small in size and really easy to use and the crosscut fence makes sure the cuts will be right at 90 degrees.

Although the guide can be used to cut shorter straight cuts, I have found the greatest benefit in cross-cutting wood prisms. It is so easy and the result is great.

The price of the material needed for this guide is a little higher in comparison with the previous guide but definitely worth having it in your workshop.

3. Jigsaw Circle Jig

This Jigsaw Circle Jig will help you cut circles, though cutting a perfect circle might be a bit of a challenge, especially for a woodworking beginner. It is really easy to end up with a skewed or a beveled cut and there are many factors that affect the accuracy of a cut with a jigsaw. Keep in mind that using the right blade is one of the most important factors that determine the precision of the cut.

Making perfect circle cuts with this guide is achievable but also experience is needed. If you have the opportunity, you should also consider cutting a circle with a trim router. That would be my option #1.

Best DIY Guides for a Jigsaw

📌 Found this post useful and inspiring?
Ready to build it? Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

KEEP READING:

This post 5 DIY Jigsaw Guides For Your Workshop (Best For Beginners) first appeared on AllFlavor Workshop and is written by About the author, Lukas

Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

About the author, Lukas — Fri, 24 Jun 2022 18:16:49 +0000

AllFlavor Workshop

Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

I have built several jigsaw guides for my workshop, from simpler to more complex. This is the most complex jigsaw guide I’ve built so far combining several different guides into one (mainly the jigsaw guide track and the jigsaw crosscut jig). The primary advantage of this new guide is its ability to assist in achieving accurate straight cuts, suitable for both rip and crosscuts.

One of the main benefits is the adjustable crosscut fence. It allows for easy fine-tuning, ensuring cuts are perfectly straight and perpendicular.

The guide track contains several pre-drilled “sight” holes for better visibility when making straight cuts as well as several cutouts and holes in the base for better stock grip when crosscutting.

The larger size of the guide allows for accommodating longer pieces of wood. It can be used freely or clamped down to a workbench for better stability and accuracy.

All the material needed for this guide is readily available in any hardware store. The base is made of plywood and aluminum angles are used for the tracks and the crosscut fence. See below for a complete list of required material.

If you have some experience with woodworking and building DIY woodworking jigs, then you will have no problems making this jigsaw guide. Nevertheless, if you are a complete woodworking beginner, I suggest you start with one of the simpler guides mentioned above.

They work just as well, and you can achieve great results with them too. I’ve relied on them for numerous projects and they’ve never let me down.

RELATED:

DIY Adjustable Jigsaw Guide Video

If you want to see how to make a Jigsaw straight cut guide and crosscut guide, watch the video below for step-by-step isntructions.

I appreciate every YouTube subscriber. It’s free and easy to subscribe to — just Click Here To Subscribe. Thank you!

Adjustable Jigsaw Guide Video
Jigsaw Straight Guide Plans
The Material you will need
How to Make an Adjustable Jigsaw Guide
- Step 1: Cut the jigsaw guide base
- Step 2: Cut the slot for the crosscut fence
- Step 3: Attach the aluminum guide rails
- Step 4: Drill the sight holes and clamping holes
- Step 5: Cut the slot in the track
- Step 6: Attach the crosscut fence
- Step 7: Attach the handle
How to Make Straight Cuts and Crosscuts with a Jigsaw Guide
- Straight cuts with a jigsaw guide
- Crosscuts with a jigsaw guide
Woodworking Jigs Used

*Safety is your responsibility. Make sure you know what you’re doing and take all necessary safety precautions while working with power tools. Safety comes first!

Jigsaw Straight Cut Guide Plans

Download the Jigsaw Straight Cut Guide Plans here

Download plans here

Material needed to build an
Adjustable Jigsaw Cutting Guide

Jigsaw Straight Edge Guide:
Plywood – 370 mm x 550 mm x 12 mm (14,5 x 21,6 x 0,47″)
Aluminum Rails – 550 mm x 15 mm x 12 mm (thickness 1,5mm)

Check all the Tools I Use

Tools:
Jigsaw – https://amzn.to/3S85cDr
Hand Drill – https://amzn.to/3HqLEnH
Trim Router (optional) – https://amzn.to/3HbQcOg
Spring Clamps – https://amzn.to/41Nuh9D
F-Clamps – https://amzn.to/48ArzY1
Chisel Set – https://amzn.to/3tHNJrT
Center Hole Punch – https://amzn.to/48Fq7mv

Other:
Drill bits – 6mm – https://amzn.to/4aI47t3
Forstner bits – 20mm, 35mm – https://amzn.to/3Hd1aDb
Double-Sided Woodworking Tape – https://amzn.to/3tPMGpM
Epoxy – https://amzn.to/3tJ5R4L
Handle
M6 Bolts, M6 Wing Nut
Wood screws (shorter for aluminum rails, longer for handle) – https://amzn.to/41PodgQ

We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.

PIN THIS TO PINTEREST

Let's Start

The base of the jigsaw guide is made of 12mm plywood. The L-angle bars are from aluminum and are used for the guide tracks and the crosscut fence. All the material is readily available in local stores.

Benefits:

The guide can be used freely or it can be clamped down to a workbench with hold-down clamps. The protrusions on the baseboard are designed specifically for this purpose.
The jigsaw guide is equipped with a handle for easier manipulation and there are several cutouts and holes drilled in the base for better visibility and stock grip.
When crosscutting the crosscut fence can be adjusted and fixed as needed to make sure the cuts are made exactly at 90 degrees.

Parameters:

Total dimensions – 370 x 550 mm
Straight cuts up to 400 mm in length
Aluminum track guides with predrilled sight holes for better visibility
Cutouts and drilled holes for easier manipulation and stock grip
Adjustable crosscut fence for a precise 90-degree cut

To build the jigsaw guide you will need a jigsaw and a hand drill. Additionally, you could use a router together with a router circle cutting jig (for routing a slot in the base) but it is not necessary and you can use the jigsaw to cut the slot.

I am also using a chisel to cut a hexagon in the baseboard to align an M6 bolt’s head with the base surface, but this is also optional. A non-countersunk bolt will work just as well.

How to Make an Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

Step 1: Cut the jigsaw guide base

For the base, you will need a plywood board (370 mm x 550 mm x 12 mm).

Draw the design on the plywood board and cut out all the unnecessary pieces. To cut the shape you can use a jigsaw. I am using a simple jigsaw guide for straight cuts I built earlier. For the internal cuts use a Forstner bit first and then cut with a jigsaw.

NOTE: When building the track, take into account the width of your jigsaw shoe. The base part for the track needs to accommodate the jigsaw base, the aluminum tracks, and some extra space on each side for clamping.

Step 2: Cut the slot for the crosscut fence

Draw a line on the jigsaw base where you want to place the crosscut fence. Mine is 105 mm from the bottom of the jigsaw base.

Drill a 4mm hole for a pivot point on one side and cut a 6mm slot for a rider on the other side (right before the track) that will secure the crosscut fence in position. To cut the slot I am using a router circle cutting jig. (To make the t-slot I cut a slot through the board base first and then trimmed the wood around to fit a t-track bolt and make it flush with the surface).

NOTE: Making a t-track slot for a t-track bolt might be unnecessary. This is quite a complicated and time-consuming approach. I wanted the t-track bolt to be flush with the surface giving the jigsaw guide a fancy look, but fixing the crosscut fence in position can be achieved in simpler ways.

You can just as well cut one slot through the base and fix the bolt in position with a nut – in this case, the adjustable bolt will not slide in a t-track and will be secured directly through the main slot.

Step 3: Attach the aluminum guide rails

Frist Guide Rail – Attach the first guide rail to the jigsaw base. Cut it to length, drill in holes for the screws, attach a double-sided tape on the bottom of the rail, and tape it to the base.

Secure the rail to the base with screws and washers. If the screws go through, grind the tips with a sander. The bottom of the jigsaw base must be smooth without protrusions.

Second Guide Rail – Attach the second guide rail to the base. Place the jigsaw on the base next to the first rail, tape the second rail on the base, and repeat the previous steps.

Make sure the jigsaw slides nicely and easily in the created track. Now is the time to adjust the rails as needed. Once finished, fix the second rail with screws.

NOTE: I am using a jigsaw shoe with my jigsaw. The jigsaw slides better on the surface and there is less resistance from the tracks.

Find This Blog Post Useful?

Join my newsletter to receive the latest news, tutorials, and project plans sent directly to your inbox!

Step 4: Drill the sight holes and clamping holes

Mark the center of the track – the cut path – and drill in sight holes using a 20mm Forstner bit every 50 mm.

Also, cut 3 holes with a 35mm Forstner bit right below the crosscut fence. These holes are useful for clamping down the jigsaw guide to the workbench and securing the stock when crosscutting.

Step 5: Cut the slot in the track

Cut a slot in the track for the jigsaw blade. Start in the first sight hole, and finish in the last one. Optionally, you can sand the cut path with sandpaper to get rid of splinters.

Step 6: Attach the crosscut fence

Pivoting point – Drill a hole for an M6 bolt in the previously drilled pivot point. Carve a hexagon with a chisel around the drilled hole to sink in the bolt’s head. Thus, the bolt won’t move. (Instead of carving a hexagon you can always drill a larger hole for the bolt’s head and fix it in with epoxy)

T-track – To adjust the fence and secure it in position I am using a simple t-track and a t-track bolt. The t-track bolt is a rider that fits in the cut slot. Carve a hexagon in the rider and insert an M6 bolt.

Crosscut fence – the crosscut fence is 260 mm long and is made of an aluminum L-angle bar.

Drill 2 holes in the bar – 1 for the pivot point, and 1 for the t-track bolt. Mount the crosscut fence on the bottom of the jigsaw guide base and fix it with nuts.

Step 7: Attach the handle

Finally, I am attaching a handle to the base. Adding a handle is a smart choice. It makes using the jigsaw guide both simpler and safer.

Conclusion

If you want to have an all-in-one solution then this jigsaw guide has it all – you can make both long straight cuts and crosscuts with possible fine adjustment, ensuring your cuts are always spot-on at 90 degrees. It’s a great addition to your jigsaw and a fun weekend project to tackle.

How to make straight cuts and crosscuts with a jigsaw guide

The following steps briefly describe how to make straight cuts and crosscuts with this DIY adjustable jigsaw guide. Keep in mind to use the right jigsaw blade for the job. Using the right blade is one of the most important things when cutting with a jigsaw to end up with a clean and straight cut.

Straight cuts with a jigsaw straight edge guide

Place the jigsaw guide over the stock and align it using the sight holes
Secure the jigsaw guide and the stock with clamps
Make sure nothing is obstructing the cut path, both above and below the guide
Place the jigsaw on the track
Slowly make the cut, keeping the jigsaw straight
Track the progress using sight holes

Crosscuts with a jigsaw crosscut guide

Place the stock below the jigsaw guide
Align it with the crosscut fence
Make adjustments to the crosscut fence as necessary
Place the jigsaw on the track
Hold the stock with your hand or secure it with hold-down clamps using the grip holes
Make sure nothing is obstructing the cut path, both above and below the guide
Slowly and steadily make the cut
Track the progress using sight holes

Read the following article for more information on how to cut straight with a jigsaw and how to avoid common mistakes that make your cuts skewed and bent.

How to cut a precise straight line with a Jigsaw

To achieve the best result, cut slowly and steadily. Keep the jigsaw in a straight position, don’t push it, and let the jigsaw do the work.

📌 Found this post useful and inspiring?
Ready to build it? Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

So, are you building this adjustable jigsaw guide? Let’s do it!

Jigsaw Straight Edge Guide and Crosscut Guide

Workshop Jigs used for this project:

This post Adjustable Jigsaw Guide for Straight Cuts and Crosscuts first appeared on AllFlavor Workshop and is written by About the author, Lukas

DIY Jigsaw Circle Jig and Jigsaw Rip Fence

About the author, Lukas — Sat, 14 May 2022 14:02:30 +0000

AllFlavor Workshop

DIY Jigsaw Circle Jig and Jigsaw Rip Fence

A jigsaw circle jig is used to accurately and precisely cut circles in the stock. The main purpose of a circle jig is to act as a guide to cut circles accurately with a precise diameter.

A jigsaw is a versatile tool that can be used to make many types of cuts, including curved shapes. It is also great for cutting intricate patterns, making straight or beveled plunge cuts, or any freehand sawing. The type of saw blade determines for which cut and for what purpose the jigsaw should be used. When equipped with the right blade you will be able to cut through wood, plastic, and even materials such as ceramic or metal.

A jigsaw is a suitable tool for cutting circles. The right type of saw blade together with the circle jig allows the jigsaw to cut precise circles.

There are a few ways how to make a jigsaw circle guide.

The first option is to make a base plate for the jigsaw with an extension arm for setting the required diameter. Such a jig with minor modifications could be used with various tools but is designed to make circular cuts only. This router circle jig is a good example of such a circle cutter and could be easily modified for a jigsaw.
The second option is to elevate a jigsaw fence to not only serve as a guide for making straight or beveled cuts but also to serve as a jig for cutting circles. In this case, the jigsaw does not use a base plate which allows for the full length of the blade to be used. This is the type of guide we will be building in this blog post.

It is relatively easy to cut a circle with this jigsaw jig and you can achieve a great result, but if you have the opportunity, you should also consider cutting a circle with a trim router.

NOTE: There are many factors that affect the accuracy of a cut with a jigsaw and you could easily end up with a skewed, crooked, or uneven cut. The following articles provide a few tips and suggestions on how to use a jigsaw to make straight and circular cuts.

RELATED:

3 Different ways to cut a circle in wood

Circle Jig for Jigsaw Video

Want to learn how to cut a circle using a jigsaw? Check out the video below! The video also walks you through creating a circle jig for jigsaw, step-by-step.

I appreciate every YouTube subscriber. It’s free and easy to subscribe to — just Click Here To Subscribe. Thank you!

Jigsaw Circle Jig Video
Jigsaw Circle Jig Plans
Material you will need
General Questions
1. Why does my jigsaw blade bend?
2. 5 tips to stop your jigsaw blade from bending
3. What is the best jigsaw blade for cutting circles?
How to Make a Jigsaw Circle Jig
1. Step 1: Cut the wood pieces
2. Step 2: Cut a slot for the extendable arm
3. Step 3: Build the fence
4. Step 4: Attach the pivot point
How to use a Jigsaw Circle Jig
1. Cutting straight with the jigsaw guide
2. How to cut a circle in wood with a jigsaw circle jig

*Safety is your responsibility. Make sure you know what you’re doing and take all necessary safety precautions while working with power tools. Safety comes first!

Jigsaw Circle Jig Plans

Download the Jigsaw Guide Plans here

Download plans here

What you'll need to make the Jigsaw Circle Guide

Jigsaw Circle Jig:
Plywood – 130 mm x 35 mm x 180 mm (5.1 x 1.3 x 0.7″)
Plywood – 50 mm x 35 mm x 9 mm (2 x 1.3 x 0.35″)
Brass flat bar– 100 mm x 2 mm x 280 mm (3.9 x 0.07 x 11″)
Brass rod – 4mm (1/8 Inch) – https://amzn.to/3vtoFWb

Check all the Tools I Use

Tools:
Jigsaw – https://amzn.to/3S85cDr
Angle Grinder – https://amzn.to/48K2klD
One Hand Clamps – https://amzn.to/48jGxkZ
Spring Clamps – https://amzn.to/41Nuh9D
Hand Drill – https://amzn.to/3HqLEnH
Tape Measure – https://amzn.to/3TN0SKM

Other:
Jigsaw Blades – https://amzn.to/4aXeF83
Drill bit (for metal) – 4mm (1/8 Inch) – https://amzn.to/48Kaaf7
Brass rod 4mm – https://amzn.to/3vtoFWb
Sandpaper Sheets – https://amzn.to/41OMx2p
Wood Glue – https://amzn.to/48ltKhJ
Epoxy – https://amzn.to/3tJ5R4L
Hold down “locking” bolt

We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.

📌 Save THIS PIN to your Board on Pinterest and build it anytime.

PIN THIS TO PINTEREST

Why does my jigsaw blade bend?

There are several factors that can cause a jigsaw blade to bend when cutting. The most common reasons are putting too much front or lateral pressure on the saw, pushing the saw at a higher speed, cutting through thick material, or not using the correct saw blade for the job.

There are several other factors that may contribute to bending the saw blade, but these are the most common ones. Avoiding these mistakes will make your cuts cleaner and more precise.

5 tips to stop your jigsaw blade from bending

Use the right blade for the job and the material you are cutting. There is a huge difference between the best and the worst blades.
Avoid putting too much pressure on the saw. Keep the jigsaw straight and let the blade do the cutting.
Take your time and don’t rush. Move forward at the right speed so that the teeth are allowed to cut completely through the material. Cutting slowly reduces blade flexing and gives the best-finished edge.
For better quality and accurate cuts use a heavy-duty saw that is equipped with blade guides (pair of rollers) and variable speed that lets you slow down when you’re at a tricky point in a pattern.
Secure the cut material to prevent vibration and wobbling

TIP: When building a jigsaw circle jig, and cutting a circle make sure the pivot pin on the jig is even with the blade. It is important to align the blade with the tangent to the circle. Otherwise, the blade will tend to wander out even more, usually pulling outward from the intended path.

What is the best jigsaw blade for cutting circles?

Cutting a circle with a jigsaw requires a specific saw blade. Not using the correct saw blade is one of the main factors that causes blade bending. There is a huge difference between the best and the worst blades.

The best jigsaw blades for cutting circles in wood are scrolling blades. The slim profile of the blade combined with its flexibility makes the scrolling blade one of the most suitable blades for cutting curves. These blades are perfect for clean and precise cuts.

After trying several scroll blades, I had the best experience with the Bosch T119BO and the Bosch T101AO3 blade.

Let's Start Building!

The jigsaw circle jig can be easily used outside or at remote locations. It is easy to mount on a jigsaw and can be mounted on both the left and right sides. The arm is extendable up to 230 mm which allows cutting circles of up to 460 mm in diameter.

Using a jigsaw might not be the ideal tool for cutting a perfect circle, but it is still possible to achieve a great result with it. If I were to cut perfect circles, I would choose a router as my preferred tool.

Jigsaw Circle Guide parameters:

Extends saw blade up to 220 mm (8.5″) from the edge of the workpiece
Cuts circles from 11cm to 460 mm (4.3″ to 11″) in diameter
Can accommodate most jigsaws

The jigsaw circle jig allows both circular cuts and straight cuts and can serve as a jigsaw fence as well. To build it you will only need a jigsaw. Additionally, you could use a grinder (as shown in the video) but it is not a necessity and a file would work just fine.

NOTE: The most important part of the build is to make sure the pivoting pin is even with the blade. Otherwise, the blade will tend to wander out even more, usually pulling outward from the intended path.

How to Make a Jigsaw Circle Jig

Step 1: Cut the Wood Pieces

Start by cutting 2 plywood pieces.

The larger wood piece serves as a guiding fence for straight cuts – 130 mm x 35 mm x 18 mm (5,1 x 1,3 x 0,7″)
The shorter piece for the pivot pin to make circle cuts – Plywood – 50 mm x 35 mm x 9 mm (2 x 1,3 x 0,35″)

NOTE: Make sure the smaller wood piece is of the same height (thickness) as the height of the fence slot on the Jigsaw shoe. Thus, after mounting the jig on the jigsaw, the extension arm remains level.

Step 2: Cut a Slot for the Extendable Arm

Cut a slot in the middle of the larger wood piece to insert the extendable arm. The depth of the cut equals the thickness of the brass bar, and the width of the cut equals the width of the bar.

To make the slot you can use the jigsaw and then refine it with sandpaper or a chisel. You can also use this simple sanding technique to get a precise slot.

Find This Blog Post Useful?

Join my newsletter to receive the latest news, tutorials, and project plans sent directly to your inbox!

Step 3: Build the Fence

Cut the brass bar to size (285 mm) and sand its edges. Apply glue in the dado and fix the bar together with the larger and the shorter wood pieces. Secure it with clamps and wait until the glue fully hardens.

Use epoxy for a tight bond and make sure the bar is perpendicular to the wood piece. This is important for straight clean cuts.

OPTIONAL: You can run 2 pins through the joint. Not only will be joint be more robust, but also aesthetically pleasing.

Cut the pins a bit longer than the actual width of the jig (around 22 mm). Drill 2 ø4mm holes in the center of the jig, apply epoxy, and insert the pins. Once the epoxy hardens sand the protrusions flat.

Step 4: Attach the Pivot Pin

Drill a ø4mm hole in the jig. It is important that the pivot pin on the jig is even with the blade. The jigsaw blade must be tangent to the circle. Otherwise, the blade will tend to wander out. The position of the pin will be slightly different for each jigsaw – take into account the type of your jigsaw.

Cut the pivot pin (34 mm) so that around 4mm will protrude above the jig. Round the edges, apply epoxy, and insert the pin into the hole.

NOTE: Sand the edges of the extendable arm if necessary to perfectly fit in the holes on the jigsaw base. If you don’t have a grinder a file can be used instead. I used a brass bar for the arm which is easy to shape but still solid and strong enough to hold the jigsaw in place while cutting.

To fix the extendable arm in the rip fence slot I am using a locking knob. You can get such a knob in your local hardware store. However, a bolt can be used as well. Some jigsaws already come with a predrilled hole for a locking bolt.

And this is what the finished jigsaw circle jig/ jigsaw fence looks like!

How to Use a Jigsaw Circle Jig and Jigsaw Rip Fence Guide

1. How to Make a Straight Cut with a Jigsaw

This jig helps you make straight cuts and fits on either side of the jigsaw. The side fence acts as a guide, leading the blade smoothly through the wood.

Securely fasten the jig to your jigsaw ensuring it’s firmly in place.
Determine the width you want for your cut and adjust the extendable arm accordingly.
Once set, tighten the locking screw to keep the arm steady.
Before cutting, ensure your workspace is clear and the wood is firmly clamped or held down.
Power on the jigsaw, making sure you have a firm grip and the blade is not touching the material.
Begin your cut, guiding the jigsaw slowly and steadily, letting the blade do the work.

Make sure to take all the necessary safety precautions.

2. How to Cut a Circle in Wood With a Jigsaw

If you need to cut a circle in wood, a jigsaw can be a handy tool to use. Here are the steps to follow:

Mount the circle jig onto the jigsaw.
Measure the distance from the saw blade to the pivot pin to set the exact circle radius.
Drill a hole in the workpiece for the pivot pin.
Drill another hole on the outer side of the circle for the saw blade.
Attach the jig to the workpiece.
Make any necessary adjustments so that the saw blade touches the outer perimeter of the circle.
Pivot the jig smoothly around the circle as you make the cut.

A Few Tips for Cutting a Circle with a Jigsaw:

Use the right saw blade for the job, preferably a scrolling blade.
Underlay the workpiece to create space for the saw blade.
Secure the cut piece with clamps to avoid vibration and wobbling.
Cut slowly and steadily.
Keep the jigsaw straight and do not apply too much pressure. Allow the saw blade to do the work.

📌 Found this post useful and inspiring?
Ready to build it? Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

Other Relevant Jigs for Cutting a Circle in Wood

Apart from the circle jig discussed earlier, there are other jigs that can help you cut circles in wood. These jigs can be easy to make and can save you time and effort.

Router Circle Jig

Table Saw Circle Jig

This post DIY Jigsaw Circle Jig and Jigsaw Rip Fence first appeared on AllFlavor Workshop and is written by About the author, Lukas

How To Make a DIY Jigsaw Guide Rail (Straight, Clean Cuts Made Easy)

About the author, Lukas — Sun, 27 Jun 2021 19:47:05 +0000

AllFlavor Workshop

How To Make a DIY Jigsaw Guide Rail (Straight, Clean Cuts Made Easy)

If you’re setting up a workshop and choosing your first tools, a jigsaw should definitely be on your list—right after a drill 😉. It’s versatile, easy to handle, and perfect for cutting curves, angles, and even metal.

Early on, I built a small jigsaw crosscut jig that worked great for crosscuts and short cuts. But it didn’t perform well on longer cuts. So I built this simple DIY jigsaw guide rail—a straightforward solution that’s helped me make long, straight cuts without breaking the bank.

This jig is super beginner-friendly and works even better when paired with a jigsaw cutting station. Follow the steps below or check out the video for a full walkthrough.

🔧 You might also find these helpful:

Best Jigsaw Blades for Plywood – for clean, splinter-free cuts
How to Make a Jigsaw Crosscut Jig – great for short, 90-degree cuts
Top Woodworking Jigs for a Workshop – other jigs I use all the time

DIY Jigsaw Guide Rail – Step-by-Step Video

Want to see how it’s done? Watch the full video below for a clear step-by-step walkthrough of how I built this jigsaw guide rail from start to finish. It’s easy to follow and a great companion to the tutorial on this page.

👉 Click here to subscribe to my YouTube channel if you’d like to support the project and get notified when I publish new jigs and builds. It’s free, and it really helps the channel grow. Thank you!

Jigsaw Guide Rail Video
Jigsaw Guide Plans
Material and Tools Needed
How to Make a Jigsaw Guide
How to Use a Jigsaw Guide Rail
My Take
FAQ

*Safety is your responsibility. Make sure you know what you’re doing and take all necessary safety precautions while working with power tools. Safety comes first! Always be cautious and careful when using any power tool.

Jigsaw Guide Rail Plans (Free PDF)

You can download the full set of free Jigsaw Guide Rail plans below. The plans include measurements, build steps, and a clear layout to help you build your own guide with confidence.

Download the Free Jigsaw Guide Rail Plans here

Download plans here

Materials and Tools You’ll Need

Here’s what I used to build this simple jigsaw guide rail. You likely have most of this already in your workshop.

Jigsaw Guide

Birch Plywood: 600 × 140 × 12 mm (for the base)
Planed Spruce Strips:
2 × 600 × 28 × 13 mm (for guide rails)
2 × 84 × 28 × 13 mm (for front/back stoppers)

🛒 Need to stock up? You can find most of these in my Tool List or check the links above.

Tools:

Jigsaw – https://amzn.to/3S85cDr
Hand Drill – https://amzn.to/3HqLEnH
Quick Clamps – https://amzn.to/48jGxkZ
Spring Clamps – https://amzn.to/41Nuh9D
Machinist Square – https://amzn.to/48fT6xw
Speed Square – https://amzn.to/3RO67Hy
DIY Marking Gauge

Other Material

Wood Glue – https://amzn.to/48ltKhJ
Gorilla Clear Glue – https://amzn.to/3vJ1xD9
Forstner Bits – https://amzn.to/3Hd1aDb
Jigsaw Blades – https://amzn.to/4aXeF83
Jigsaw Blades (Extra Clean Cuts) – https://amzn.to/3TcPuWV
Sandpaper Sheets – https://amzn.to/41OMx2p
Wood Screws – https://amzn.to/41PodgQ
Painters Tape – https://amzn.to/3SpPylR

We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.

PIN THIS TO PINTEREST

A simple jigsaw guide rail that helps you cut long, straight lines with ease. Build it in an afternoon and upgrade your jigsaw’s accuracy!

Common Questions About Jigsaw Guide Rails

How difficult is building a jigsaw straight cut guide?

Not difficult at all. This is a beginner-friendly project that only requires a few basic tools — a jigsaw and a hand drill. You can finish it in a few hours, and it’s a great first jig to build for your workshop.

It’s simple, low-cost, and makes a huge difference in how clean and accurate your jigsaw cuts are.

Can I cut a straight line with a jigsaw?

Yes, you can — but it takes a little help. While jigsaws are best known for curves and angled cuts, straight cuts can still be clean and precise with the right setup. That’s where a jigsaw guide rail comes in.

Use a guide like this one (or even a straight piece of wood or level) to steer the jigsaw along your cut line. And don’t forget: the right blade matters!

🔗 How to Cut Straight with a Jigsaw

How do you make a clean cut with a jigsaw?

Here are a few quick tips to avoid tear-out and get smoother results:

Use the right blade – Reverse-tooth or dual-cut blades reduce splintering.
Apply masking tape – Tape over the cut line to hold fibers in place.
Adjust the speed and pendulum setting – Go slower for delicate materials.
Use a guide – A jig like this helps maintain control and consistency.

🔗 How to change a jigsaw blade

BOSCH T101BR 5-Piece

10 TPI reverse-pitch tooth pattern for extra clean top surfaces when cutting in hard and soft wood, plywood.

Let’s Start Building

This jigsaw guide rail is made from plywood and spruce wood, but feel free to use MDF or HDF if that’s what you have on hand. It supports straight cuts up to about 500 mm, depending on your jigsaw’s size and shoe type.

You can use it on its own or combine it with my Jigsaw Cutting Station for even more control. If you’re aiming for accurate crosscuts and angle cuts, this setup works surprisingly well — especially for beginners.

How to Make a DIY Jigsaw Guide Rail

Step 1: Build the Jigsaw Guide Base

Start by measuring your jigsaw’s base plate or shoe cover. This will determine how much space you’ll need between the guide rails to allow the jigsaw to slide smoothly with minimal resistance. For reference, the width of my jigsaw’s shoe cover is 84 mm, but be sure to measure your own model.

Next, cut a rectangular base for the guide — I used birch plywood (600 × 140 × 12 mm). You can also use MDF or HDF if that’s what you have available.

I intentionally made the base a bit wider than needed to give some clearance between the rails and the jigsaw. This makes the movement much smoother during cuts.

💡 Tip: A 12 mm thick board feels solid and adds stability, but you could also go for 9 mm if weight is a concern. The thicker base helps support the jigsaw blade better, reducing flex and the risk of a skewed cut.

⚠️ Note: Cutting a perfectly straight 90-degree angle with a jigsaw isn’t always easy—especially on thicker materials. To get better results:

Go slower on thick boards — the thicker the wood, the easier it is for the blade to wander.
Apply consistent forward pressure and keep the jigsaw steady.
Most importantly, use a blade designed for long, straight cuts — there are plenty of options tailored to this purpose.

Step 2: Attach the Guide Tracks

Cut the guiding rails and the front/back stoppers. I used a crosscut jig I already had in the workshop for this step.

I went with planed spruce wood rails (600 x 28 x 13 mm). The jigsaw slides really well between these, and their wider profile makes it easy to clamp the jig down to a workbench during use.

1. Attach the first guide rail

Start by gluing one of the rails to the base. Clamp it down and let the glue dry.
If you want, you can also fix the rail with a few screws — I usually do this for added security. 😉

2. Attach the second guide rail

To install the second rail, place your jigsaw on the guide and position the second rail snugly against the other side of the jigsaw shoe. Clamp it temporarily to test the fit before screwing it down permanently.

💡 TIP: Add a thin piece of tape (like electrical tape) to one side of the jigsaw shoe when fitting the second rail. It creates a tiny bit of space so the jigsaw slides more easily in the track.

3. Attach the stoppers

Measure and cut two stoppers so they fit nicely between the rails at the front and back. Fix them in place with glue and screws to keep the jigsaw from sliding out of the track.

Step 3: Drill in Sight Holes

Once both rails are attached, it’s time to drill sight holes along the base. These holes do two things:

Make it easier to align the jig with your cutting line
Allow you to mount the jigsaw blade precisely

Start by marking the positions for the first and last hole, then evenly space the others in between.

Step 4: Cut the Slot & Sand the Guide

With the sight holes in place, the next step is cutting the actual slot for the jigsaw blade. This will guide the jigsaw during every cut.

Place your jigsaw on the rail and slowly make a straight cut from one end to the other, using the sight holes to help you stay aligned.

After cutting the slot, sand the entire jig — especially the edges and inner track — to remove any splinters and ensure a smooth glide for the jigsaw.

TIP: Sanding the inside edges of the guide rails makes a big difference — it helps the jigsaw slide with less resistance and reduces wear on the shoe.

Enjoying This Blog Post?

Join my newsletter to receive the latest news, tutorials, and project plans sent directly to your inbox!

How to use a Jigsaw Guide Rail

Using the jigsaw guide rail is straightforward and makes a big difference in cut accuracy — especially on longer boards.

Here’s how to use it step by step:

Mark your cut line on the workpiece with a pencil or marking knife.
Align the guide rail so that the blade lines up with your mark (use the sight holes and the blade slot for alignment).
Secure the jig using clamps. Make sure both the guide rail and your workpiece are firmly fixed.
Check blade clearance — especially underneath the workbench — to avoid hitting anything during the cut.
Make your cut slowly and steadily. Let the jigsaw do the work without forcing it.

⚠️ TIP: Always double-check which side of the line you’re cutting on — inside, outside, or directly on it — to get the exact size you need.

My Experience Using This Jigsaw Guide Rail

This guide has been a great addition to my workshop. It’s super easy to build, lightweight, and quick to set up. Honestly, it surprised me how accurately I could make long, straight cuts with such a simple jig.

The cuts were clean, straight, and not skewed, which can sometimes happen with a handheld jigsaw — especially without a guide.

✅ My key takeaway: If you’re using a jigsaw often, this is one of the best upgrades you can make. It doesn’t take much time or money to build, and it significantly improves your results.

🔧 Just remember: for the best performance, use the right blade and follow the tips mentioned earlier (especially around blade selection and setup). It’s the combo of the jig + the blade + a steady feed that makes it work so well.

I’ve used this guide across multiple projects and keep coming back to it. It’s portable, reliable, and does exactly what I need — without overcomplicating things.

KEEP READING:

📌 Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

Frequently Asked Questions

What materials work best for building a jigsaw guide rail?

Baltic birch plywood is a great option because it’s flat, strong, and stable. Spruce or pine strips also work well for the rails. Avoid warped or knot-filled boards as they’ll affect accuracy.

Can I use this jigsaw guide rail with different jigsaw brands?

Yes — this guide is universal and works with most jigsaws. Just measure your jigsaw’s base plate and adjust the rail spacing during the build to ensure a snug but smooth fit.

How long of a cut can I make with this jigsaw guide?

The cutting length depends on how long you make the guide. This version supports cuts up to around 500 mm, but you can easily adjust the length to suit your needs or workspace.

Woodworking Jigs used for this project:

This post How To Make a DIY Jigsaw Guide Rail (Straight, Clean Cuts Made Easy) first appeared on AllFlavor Workshop and is written by About the author, Lukas

How To Make a Jigsaw Guide and Crosscut Jig

About the author, Lukas — Mon, 17 May 2021 16:53:06 +0000

AllFlavor Workshop

How To Make a Jigsaw Guide and Crosscut Jig

If you only have a jigsaw in your workshop and want to make clean, accurate straight cuts or 90-degree crosscuts, this simple jigsaw guide and crosscut jig will make a big difference.

It’s a beginner-friendly woodworking jig made entirely from plywood — and the best part? You only need a jigsaw to build it. I’ve used this jig for countless builds, and I’m still surprised how useful it’s been. It doesn’t cost much to make and is perfect if you’re building your workshop on a budget.

The jigsaw is usually seen as a tool for cutting curves and complex shapes, which is where it really shines. But you can absolutely use it for straight cuts, too — you just need a solid guide to help. The most effective way is to use a jigsaw straight-edge guide like the one in this project.

RELATED:

How to Make a Jigsaw Guide and Crosscut Jig Video

If you prefer to see it in action, I’ve got you covered. Watch the step-by-step video below to see exactly how I built the jig — from cutting the base to attaching the guides and making clean crosscuts.

And if you find it helpful, consider subscribing — it’s free, and it really helps support the channel. Thank you!

How to Make a Jigsaw Crosscut Jig Video
Jigsaw Guide Plans
Materials and Tools Needed
How to Make a Jigsaw Guide
How to Use a Jigsaw Guide and Crosscut Jig
My Take
FAQ

Jigsaw Guide and Crosscut Jig Plans

Download the Free Jigsaw Guide and Crosscut Jig Plans here

Download plans here

What you'll need to build the Jigsaw Guide

Jigsaw base:

Birch Plywood – (300 x 400 x 12 mm)
2x Aluminum L Angle – (400 x 11 x 14 mm; 300 x 11 x 14 mm)

Other:

M4 Bolts (Countersunk) – 15 mm, M4 Nuts Washers
Handle or a Piece of scrap wood (200 x 28 x 18 mm)
Double-Sided (Carpet) Tape – https://amzn.to/3tPMGpM
Sandpaper Sheets – https://amzn.to/41OMx2p
Machinist Square – https://amzn.to/48fT6xw
Speed Square – https://amzn.to/3RO67Hy
Wood Glue – https://amzn.to/48ltKhJ
Hardware Assortment Kit – https://amzn.to/41PodgQ
Painters Tape – https://amzn.to/3SpPylR

Tools:

Jigsaw – https://amzn.to/3S85cDr
Hand Drill – https://amzn.to/3HqLEnH
Angle Grinder – https://amzn.to/48K2klD
Quick Clamps – https://amzn.to/48jGxkZ
Spring Clamps – https://amzn.to/41Nuh9D
Jigsaw Blades – https://amzn.to/4aXeF83
Jigsaw Blades (Extra Clean Cuts) – https://amzn.to/3TcPuWV
DIY Marking Gauge

📎 Want to see all the tools I use in my workshop?
👉 Check the full list here

💬 We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate, AllFlavor Workshop earns from qualifying purchases.

📌 Save THIS PIN to your Board on Pinterest!

PIN THIS TO PINTEREST

Let's Start

This jig is easy to make and a great woodworking project if you’re just getting started. You’ll only need a jigsaw and some basic materials to build it.

The jig combines two functions:

A jigsaw straight edge guide for long, straight cuts
A jigsaw crosscut jig for 90-degree cuts on smaller pieces

I’ve built this jig from 12 mm birch plywood and a couple of aluminum L-angles, and I use it all the time in my workshop. You’ll find it especially helpful for working with plywood sheets, short boards, and wooden strips.

Let’s walk through it step by step.

How to make a Jigsaw Guide and Crosscut Jig

Step 1: Cut the Jigsaw Base

Start by cutting the base of your jig from 12 mm birch plywood, measuring 400 × 300 mm.

Use a straight edge, level, or long scrap board to guide your jigsaw if you don’t already have a jig. Getting a clean, accurate rectangle now will make all the next steps much easier — especially when attaching the aluminum guide rails.

If your jigsaw is the only power tool available, don’t worry. Just go slow, mark your cut line clearly, and keep steady pressure while following your guide.

📌 Tip: Make sure at least one long side is perfectly straight — this will be your reference edge later when attaching the straight-edge guide.

⚠️ Avoiding skewed cuts with a jigsaw:

Use a fine-tooth, straight-cut jigsaw blade
Let the blade do the work — don’t force it
Apply even pressure and avoid pushing against the guide too hard
The thicker the material, the more likely it is to skew — go slow

👉 Check out these tips on how to cut straight with ta jigsaw.

Step 2: Attach the Straight Edge Guide

This jig uses two aluminum L-angles — one as the guide rail for straight cuts, the other as a fence for crosscuts.

1. Cut two L-angles to size:

Long rail (guide): 400 mm — matches the long side of the plywood base
Short rail (crosscut fence): just under 300 mm — will be cut flush after mounting

2. Placement:

The guide rail goes on top of the base.
The crosscut rail goes on the bottom to act as a stop.

3. Mark the guide position:

Measure from the edge of your jigsaw shoe to the center of the blade. For example, mine measured slightly over 40 mm.
Use this distance to offset the guide rail from the plywood’s straight edge.

4. Attach the guide:

Use double-sided tape to temporarily fix the rail in place.
Drill countersunk holes through the angle and plywood.
Secure with M4 bolts and nuts underneath.

5. Trim the base:

Once the guide is secured, cut off the excess plywood with the jigsaw. This creates a clean, flush edge that lines up perfectly with your blade.

📌 Tip: Take your time measuring the offset for the guide. This directly affects the accuracy of every cut.

Step 3: Attach the Crosscut Fence

Now it’s time to add the crosscut fence, which allows you to make accurate 90° cuts with your jigsaw.

1. Mark the fence location:

Flip the base over (bottom side facing up).
If your board is perfectly square, use a ruler marking gauge to draw a line across the base.
If it’s not perfectly square, use a long speed square or framing square to mark a true 90° line from the guide edge.

2. Double-check the angle:

Ensure the fence is exactly perpendicular to the guide rail. Even small misalignments will throw off your crosscuts.

3. Attach the fence:

Use double-sided tape to hold the angle in place.
Drill holes through the angle and base, then secure it with M4 bolts and nuts like in the previous step.

📌 Tip: Take your time aligning this part. The accuracy of your 90° cuts fully depends on how square this connection is.

Step 4: Cut the Shape of the Jigsaw Guide

Once the guide rail and crosscut fence are installed, it’s time to cut out the final shape of the jig.

1. Mark your design

Start by sketching the overall shape of the jig on the plywood base.
Mark the location for the handle, but don’t attach it yet — you’ll cut the shape first.

2. Trim the excess wood

Use your jigsaw to cut away the unnecessary material. This will:
- Reduce weight
- Improve maneuverability
- Allow better visibility of the cut line

3. Cut out the center opening

Remove the inner section of the base. This cutout gives you better grip on small pieces during crosscuts and reduces sawdust buildup.

4. Attach the handle

After cutting the shape, secure the handle (I used a piece of spruce wood) using glue and screws.
Optionally, round the edges and sand the surface for a more comfortable grip.

📌 Tip: For small 90° cuts, you can also use a speed square in combination with this jig.

Subscribe to the Newsletter

Join my newsletter to receive the latest news, tutorials, and project plans sent directly to your inbox!

Using a Jigsaw Guide and Crosscut Jig

There are two main ways to use this jig, depending on the cut you’re trying to make:

1. Straight Cuts Along a Marked Line

Use the long guiding rail for making clean, straight cuts on larger boards.
Simply draw your cut line, align the jig’s guide rail to it, and clamp the jig in place.
You can either hold the handle firmly or use clamps for better stability.
This method is great for breaking down sheet goods or prepping boards for joinery.

2. Accurate 90-Degree Crosscuts

The jig’s crosscut fence is fixed at a perfect right angle to the guiding rail, which helps ensure square cuts.
It works well for both short and long boards.
For short pieces, you can hold them down in the center opening of the jig while cutting — it gives you more control and keeps your hands safely away from the blade.

⚠️ Accuracy Tip: For the jig to deliver perfect 90-degree results, the aluminum L angles must be mounted perfectly perpendicular to each other. It’s worth taking the time to double-check your measurements here — the accuracy of the guide depends on it.

How to Avoid Tear Out With a Jigsaw

Tear-out — the splintering that happens along the cut edges — is a common frustration when using a jigsaw. It’s especially noticeable on plywood and veneered boards. But with a few simple tricks, you can get much cleaner results:

Tips for Cleaner Jigsaw Cuts:

Use a sharp, fine-toothed blade: Higher TPI (teeth per inch) blades reduce splintering and leave smoother edges.
Apply masking or painter’s tape along the cut line: This helps hold wood fibers in place and minimizes chipping.
Cut with the finished side facing down: Most jigsaws cut on the upstroke, so the underside of your workpiece will be cleaner.
Use a backing board underneath: A sacrificial scrap piece helps support the bottom fibers and prevents breakout.

💡 Looking for the best blades for clean jigsaw cuts?
👉 Check out my top picks here: Best Jigsaw Blades for Plywood for Clean Cuts

BOSCH T101BR 5-Piece

10 TPI reverse-pitch tooth pattern for extra clean top surfaces when cutting in hard and soft wood, plywood.

My Take

If a jigsaw is the only power saw in your workshop, building a simple guide like this one can really change how you work — it definitely helped me. I’ve used this jig for dozens of small projects where clean, straight, or 90-degree cuts were needed but I didn’t want to reach for a larger tool.

This guide is especially helpful for:

Short straight cuts
Precise crosscuts up to 400 mm
Smaller workpieces or tight spaces

Despite being a compact jig, it’s surprisingly versatile and very easy to store — even in a small workshop. You can mount it on a wall, hang it on a French cleat, or just keep it under your workbench.

🔧 One thing to remember: the blade you use really matters. For crosscuts, I recommend a slightly wider jigsaw blade with more stability — it helps maintain straight lines and avoid deflection. There’s a huge range of jigsaw blades available, so pick the right one for your cut and material.

If you often work with longer boards, I suggest pairing this jig with a Jigsaw Guide for Long Straight Cuts or building a Jigsaw Cutting Station for added stability and precision.

👉 Ready to build more? Check out these top woodworking jigs for your workshop.

FAQ: Jigsaw Guide and Crosscut Jig

Can you make straight cuts with a jigsaw?

Yes, but it’s tricky without a guide. A jigsaw naturally wants to follow the grain or curve, so using a straight-edge guide or jig is the best way to get clean, accurate straight cuts.

What is the best blade for straight cuts with a jigsaw?

Use a wide, stiff blade with a high TPI (teeth per inch)—typically labeled as “clean cut” or “precision cut.” These blades reduce deflection and tear-out.

Can I make 90-degree crosscuts with a jigsaw?

Yes, with the right setup. A crosscut jig like this one ensures your cuts are square. Just make sure your jig’s guide and fence are perfectly perpendicular.

Why are my jigsaw cuts not straight?

This is often caused by the wrong blade type, cutting too fast, or not supporting the material properly. A good guide, slow feed rate, and the right blade help eliminate skewed or beveled cuts.

How thick of wood can I cut with a jigsaw guide?

It depends on the blade, but for jigs like this, cutting boards up to 18–20 mm (¾”) thick works well. Thicker boards may deflect the blade more.

PIN THIS TO PINTEREST

A finished jigsaw guide and crosscut jig — compact, easy to build, and great for straight or 90° cuts.

Make a Jigsaw Straight Cut Guide and Jigsaw Crosscut Jig

Jigs used for this project:

This post How To Make a Jigsaw Guide and Crosscut Jig first appeared on AllFlavor Workshop and is written by About the author, Lukas

jigsaw projects – AllFlavor Workshop

How to make a DIY Jigsaw Table (Step by Step Guide)

How to Mount a Jigsaw to a Table Video

Table of Contents

Jigsaw Table Plans PDF

Material needed for a DIY Jigsaw Table

What are the benefits of an inverted jigsaw table?

How much blade above table when using a jigsaw?

How to change a blade on a jigsaw table?

Let's Build It

How to Make a Jigsaw Table (Step-by-Step)

Step 1: Build the jigsaw table desk

Step 2: Attach the table legs

Find This Blog Post Useful?

Step 3: Make the arm attachment

1. Jigsaw Table Arm – Rear Attachment

Build bearing guides for the blade

2. Jigsaw Table Arm - Side attachment

Step 4: Make a simple jigsaw table fence

Conclusion

How to set up and use a jigsaw table

Is jigsaw the same as scroll saw?

Safety precautions while working on a jigsaw table

How to Make a Jigsaw Table DIY

Woodworking jigs used for this project:

5 DIY Jigsaw Guides For Your Workshop (Best For Beginners)

AllFlavor Workshop Youtube Channel

Table of Contents

Jigsaw Guide Basics

Best DIY Jigsaw Guides

Make Clean Cuts with a Jigsaw

Types of Jigsaw Guides

DIY Jigsaw Guides for Straight Cuts and Crosscuts

1. Simple Jigsaw Guide for Short Cuts

2. DIY Jigsaw Guide Rail

3. DIY Jigsaw Guide and Crosscut Jig

4. Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

DIY Jigsaw Circle Jigs

1. DIY Jigsaw Circle Jig and Rip Fence Guide

Which jigsaw guide should I build first?

1. Best DIY Jigsaw Guide for Straight cuts

2. Best DIY Jigsaw Guide for Crosscuts

3. Jigsaw Circle Jig

Best DIY Guides for a Jigsaw

Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

DIY Adjustable Jigsaw Guide Video

Table of Contents

Jigsaw Straight Cut Guide Plans

Material needed to build anAdjustable Jigsaw Cutting Guide

Let's Start

How to Make an Adjustable Jigsaw Guide for Straight Cuts and Crosscuts

Step 1: Cut the jigsaw guide base

Step 2: Cut the slot for the crosscut fence

Step 3: Attach the aluminum guide rails

Find This Blog Post Useful?

Step 4: Drill the sight holes and clamping holes

Step 5: Cut the slot in the track

Step 6: Attach the crosscut fence

Step 7: Attach the handle

Conclusion

How to make straight cuts and crosscuts with a jigsaw guide

Straight cuts with a jigsaw straight edge guide

Crosscuts with a jigsaw crosscut guide

Jigsaw Straight Edge Guide and Crosscut Guide

Workshop Jigs used for this project:

DIY Jigsaw Circle Jig and Jigsaw Rip Fence

Circle Jig for Jigsaw Video

Table of Contents

Jigsaw Circle Jig Plans

What you'll need to make the Jigsaw Circle Guide

Why does my jigsaw blade bend?

5 tips to stop your jigsaw blade from bending

What is the best jigsaw blade for cutting circles?

Let's Start Building!

How to Make a Jigsaw Circle Jig

Step 1: Cut the Wood Pieces

Step 2: Cut a Slot for the Extendable Arm

Find This Blog Post Useful?

Step 3: Build the Fence

Step 4: Attach the Pivot Pin

Material needed to build an
Adjustable Jigsaw Cutting Guide